Remodeling Companies in San Diego: How to Choose One

By Guy Elbaz, IO Builders Group, CSLB #1159596. Last reviewed November 2026. This is general information, not legal advice. The short answer. Check the license yourself on the CSLB site and make sure its class fits your job. Get a written scope with every allowance named. Keep the down payment inside California’s cap: $1,000 or 10 percent of the price, whichever is less. Ask who pulls the permit and who’s on your site each day. Then compare the bids. San Diego County has a long list of remodeling companies. What separates them is on paper, and you can check almost all of it before anyone opens a wall. We’re a remodeling company too, so read this with that in mind. It’s the list we’d hand a relative. Use it on us as well. 1. Look up the license yourself Go to the Contractors State License Board’s license check at cslb.ca.gov and type in the number from the bid. Don’t use a link the company sends you. It takes 2 minutes. Read 4 things. The status should say Active. The business name should match the name on your contract. The bond should be current. Workers’ compensation should show a current policy or an exemption, and an exemption means the company says it has no employees. If a crew of 4 shows up under an exemption, those workers aren’t covered on your property. Since January 1, 2025, California lets unlicensed people take jobs under $1,000 only when the work doesn’t need a permit. A remodel is bigger than that. If the person at your door is “working under” someone else’s license, you aren’t hiring a licensed contractor. 2. Make sure the license class fits the job California licenses come in classes. The B, General Building, is the one most remodels need. The rule sits in Business and Professions Code section 7057: a B can take a prime contract for work that uses at least 2 unrelated trades, and framing or carpentry doesn’t count as one of them. A kitchen with plumbing, electrical, drywall and cabinets fits. A job that’s one trade on its own needs that trade’s specialty license, or the B has to hire a specialty contractor who holds it. Specialty classes start with C. A C-36 is plumbing, a C-10 is electrical and a C-54 is tile. A tile setter with only a C-54 can’t take your whole bathroom. A C-27 is landscaping, and hardscape like pavers, walkways and garden walls sits there. Ask which class covers each part of your job. A company that answers in one sentence knows its license. 3. Get a scope you could hand to a stranger “Remodel master bath” isn’t a scope. A real one says what comes out, what goes in and where: the shower drain moves, the valve is a named model, the tile runs to the ceiling in the shower. When 2 bids describe different jobs, the cheaper one is often cheaper because it describes less. Then find the allowances. An allowance is a placeholder in the price for something you haven’t picked yet, like tile or a faucet. A bid with thin allowances looks lower and climbs the day you choose real tile. Ask for each allowance in writing, what it’s based on and what happens if you go over or under it. 4. Know if you’re signing a price or an estimate A fixed-price contract sets one amount for the scope described, and it only moves through a signed change order. An estimate is a forecast. It can move without your signature. Both are legal. Just know which one you’re holding. 5. Keep the down payment inside the cap Section 7159 of the same code sets the rules for California home improvement contracts. The down payment can’t be more than $1,000 or 10 percent of the contract price, whichever is less. After that, you pay for work that’s done and materials that have arrived. A company asking for a third up front is asking you to break the law with it. Look for payments tied to things you can see, like a passed rough inspection or tile complete. Hold the last payment until the walkthrough and the punch list are finished. 6. Get every change order in writing, first Under 7159, a change order becomes part of the contract only when it’s written and signed before the work it covers starts. “We’ll just add that” is how disputes begin. 7. Ask who pulls the permit The licensed contractor should pull it under its own license number and book the inspections. If you’re asked to pull it as an “owner-builder,” you take on the legal responsibility for the job, and the CSLB warns homeowners about exactly that. In the City of San Diego, permits go through Development Services. Poway, Carlsbad, Escondido and the other cities run their own counters, and unincorporated places like 4S Ranch go through the County. 8. Find out who’s on site, and who’s insured Ask who runs your job day to day, whose employees do the work and which trades are subcontracted. Then ask for the general liability and workers’ comp certificates. Call the carrier’s number on the certificate, not the one in the email, and confirm the policy’s current. 9. Check finished work and finished permits Ask for 2 or 3 recent jobs like yours, with a homeowner you can call. Ask what went wrong and how it was handled. Every job has something. If the company says it pulled permits on those jobs, you can often look them up on the city’s permit search. A permit marked final means the inspector signed off. Questions to ask every remodeling company What’s your CSLB license number, and which classes cover my job? Is this a fixed price or an estimate? Which items are allowances, and what’s each one based on? What’s the down payment, and what triggers each payment after it? Who pulls the permit, and under whose license? Who’s on site each day, and